Point-of-purchase displays are the quiet closers of retail. Shoppers walk an aisle with a loose plan, and the display that interrupts that walk with a clear offer is often what decides which brand lands in the cart. This guide explains what POP displays are, the formats worth knowing, the materials and print methods behind them, how they differ from the other retail graphics you might be weighing, and how a Rochester, NY buyer can source them without the delays of a distant vendor.
What are POP displays, and why do they matter for Rochester retailers?
A point-of-purchase (POP) display is a branded fixture placed where a purchase decision happens: at the shelf, on an endcap, beside the register, or in a promotional floor spot. The category exists because the decision is still made inside the store.
POPAI’s 2012 Shopper Engagement Study, the long-cited benchmark for this question, put the in-store decision rate at 76 percent, which it called an all-time high, and found that nearly one in six brand purchases are made when a display for that brand is present in store. More recent work points the same way. In a January 2026 survey of 1,119 U.S. shoppers commissioned by display maker Frank Mayer, nearly three in four said their purchasing decisions are not fully determined before they enter a store, and nine out of ten said they sometimes, usually or always buy something they did not intend to buy.
A display is one of the few tools a brand controls at that moment. It does not just decorate an aisle. It changes which product a shopper notices and which one lands in the cart.
TLF Graphics sits inside this exact category. Our retail signage work covers POP and POS displays, aisle signage, window graphics, counter mats, backlit signs, floor graphics, wall graphics, and banners. As that page puts it, compelling retail signage and messaging will directly impact in-store traffic flow, which is the entire job of a POP display.
Which POP display formats should Rochester brands consider?
Start with the format, because it dictates everything downstream. The Frank Mayer survey found that 76 percent of shoppers have discovered a new product or brand from seeing it on a retail display. The POPAI study found that 56 percent of shoppers recalled seeing in-store displays at all, and that endcap and freestanding displays were recalled most often. Between those two numbers sits the real decision: the format you pick determines whether your display gets remembered or walked past.
Here are the formats most retailers and brands use, and what each one is good for:
| Format | Where it sits | Best for |
|---|---|---|
| Counter display | On the checkout counter | Impulse items, small SKUs, samples |
| Floor display | Freestanding on the sales floor | A featured product or a seasonal push |
| Endcap | The end of an aisle | High-visibility promotions and launches |
| Dump bin | Open floor bin | Bulk, clearance, and grab-and-go items |
| Standee or cutout | Entrance or aisle | Brand presence and campaign tie-ins |
| Pallet display | Club and big-box floors | Large-volume, pre-packed quantities |
| Shelf and aisle signage | On the shelf edge | Price, callouts, and wayfinding at the shelf |
If you are choosing between a few of these, let the product decide. A tall, light SKU that sells on impulse belongs on a counter display. A heavy case-packed item belongs on a pallet or in a dump bin. A launch you want associated with a whole category belongs on an endcap, if the retailer will sell you one.
Shopper research
How much is still decided in the aisle
Share of 1,119 U.S. shoppers surveyed in January 2026.
Source: Frank Mayer and Associates, 2026 In-Store Retail Display Influence Report, fielded January 2026. The 90 and 75 percent figures are reported as “nine out of ten” and “nearly three in four.”
What materials and print methods go into a POP display?
The material is a durability decision, and it should follow how long the display needs to last. That one-in-six purchase lift only holds if the display survives the aisle, so material and print method are not cosmetic choices. They decide whether a unit is still selling in week three or sitting scuffed in a stockroom.
Common POP substrates fall into a few groups:
- Corrugated board for temporary promotions that run a few weeks. Light, inexpensive, and fully printable.
- Foam board and styrene for semi-permanent units that need more rigidity and a cleaner face.
- Rigid plastics and composite panels for permanent fixtures and high-traffic zones that take abuse.
Print method matters as much as the board. At TLF Graphics, digital printing is built for extremely high quality regardless of quantity, with color integrity and repeatability and unlimited versions and variable data, which suits short-run and regional retail programs and any display that has to go out in several market-specific versions. Screen printing produces outdoor-durable printed products on rigid and thick substrates, including overlay panels, for units that take handling. JetFX embellishments add digital foiling, digital tactile screening for raised effects, spot varnishing in matte or gloss, and digital holograms, with no tooling, where a display needs to look premium on the shelf.
Those same presses print on films, foils, paper, plastics and pressure-sensitive materials, so the product label, the shelf sign and the display face can be produced to the same color target instead of drifting apart across three suppliers.
A practical note on sourcing: TLF prints the graphic faces and signage, and also carries displays, banner stands, table covers, tents and trade show products through its online display store. Pairing the printed graphics and the structure through one producer avoids the mismatch that happens when artwork and hardware come from two vendors on two timelines.
POP display, counter mat, or window graphic?
These three get specified together and solve different problems, so it is worth being clear about which one your campaign actually needs.
A POP display holds product. It is a structure, it occupies floor or counter space the retailer has to grant you, and it is the only one of the three that merchandises the item as well as advertising it.
A counter mat brands the transaction surface a shopper is already looking down at while they pay. It takes no extra footprint, which is often why a store says yes to it. Our point-of-purchase counter mat guide covers how that surface is used, and the counter mats buyer’s guide covers specifying and ordering them.
A window graphic works before the shopper is inside, converting passing traffic into a visit. Our window graphics guide covers films, perforated vinyl and coverage rules for storefront glass.
And if the setting is a show floor or a booth rather than a store aisle, that is portable exhibit hardware, not retail POP. Our trade show displays guide covers that build instead.
How do you design a POP display retailers will actually place?
Design for the retailer’s rules first, not just your brand. In the January 2026 Frank Mayer survey, 63 percent of shoppers said retail displays have influenced their choice when comparing similar products or brands. You only win that comparison when the display reads clearly and, just as important, when the store actually agrees to set it, which depends on fit and compliance.
Work through this checklist before you print:
- Dimensions and planogram fit. Confirm the footprint, height, and shelf or endcap space the retailer allows. A display that does not fit the planogram does not get placed.
- Weight and stocking. The unit must hold the product safely and be simple for store staff to assemble and restock.
- Message hierarchy. Lead with one offer or benefit readable from several feet away. Save detail for arm’s length.
- Brand accuracy. Supply brand colors as target values so the print can be matched across the run and across reorders.
- Lifespan. Decide temporary versus permanent up front, because it changes the board, the coating, and the budget.
- File setup. Provide print-ready vector art or high-resolution files with bleed so the graphics reproduce cleanly at display scale.
- Version count. If different stores or regions need different offers, say so before the job is quoted. Versioning is a digital press decision, not a late change.
Getting these right is what separates a display that ships and sits in a back room from one that earns floor space and sells.
How do you source POP displays in Rochester, NY?
Source locally when speed and reorders matter. TLF Graphics produces from two facilities on Metro Park in Rochester, a corporate headquarters at 235 Metro Park and an operations facility at 145 Metro Park, both in Rochester, NY 14623, serving the greater Rochester market and shipping nationally.
Behind those addresses is the plant: over 75 different printing and finishing devices across digital, flexographic, screen and direct-to-object methods. TLF is an ISO 9001:2015 certified company and is listed under UL’s Authorized Label Suppliers Program as PGAA.LP1575, so the same quality system that governs our industrial labels governs retail graphics. The work also goes out the door and onto the wall: our print and installation projects include the graphics produced for the Atlantic Hockey Association championship, and the gallery shows the presses and finishing lines the work runs on.
A local producer shortens three cycles that distant vendors stretch out. Proofing, because you can review a physical sample quickly rather than waiting on freight. Production, because digital runs scale from a handful of units to large volumes without new tooling. And reordering, because a display that works can be rerun against the original color target instead of being redesigned.
If you also decorate the product itself, product decoration and the display can be quoted together, which is the simplest way to keep a brand color consistent from the bottle to the fixture it sits on.
When you are ready to scope a POP display program, contact TLF Graphics with your product, your target retailers, and your timeline, and we will help you match format, material, and print method to the job.
Frequently Asked Questions
What is the difference between POP and POS displays?
Point-of-purchase (POP) is the broad category of any in-store display that promotes a product where shopping happens, anywhere on the floor or at the shelf. Point-of-sale (POS) is the narrower subset positioned right at the register or checkout. Every POS display is a POP display, but not every POP display sits at the point of sale.
How long do POP displays last?
It depends on material and build. Temporary corrugated displays are designed for promotions that run a few weeks. Semi-permanent foam board or styrene units last through a season, and permanent rigid plastic or composite fixtures are built to hold up for a year or more in high-traffic zones.
Should I order a POP display or a counter mat?
Order a display when the product needs to be held, stacked or merchandised, and a counter mat when the goal is to brand the transaction surface the shopper is already looking at. Many checkout programs run both: a counter display that holds the product, sitting on a printed mat that carries the offer.
What file format should I send for a POP display?
Send print-ready vector artwork or high-resolution raster files with bleed, and supply your brand colors as target values so the print can be matched consistently across the run and any reorders. A local producer can review your files before production to flag issues early.
Can you match our exact brand colors across a reorder?
TLF Graphics lists color integrity and repeatability as a property of its digital printing, which is what lets a reordered display match the original run rather than drift. Supplying defined brand color targets with your art makes that matching reliable.
Do you only serve Rochester, or do you ship nationally?
TLF Graphics produces from two facilities on Metro Park in Rochester, NY, serves the local market, and also prints and ships nationally. Local clients gain faster proofing and reorders, while national clients get the same production capability.